Metagenomic

🍄 This tutorial shows how to use MicroBioMeta on shotgun metagenomic data, as an alternative to the amplicon (metabarcoding) workflow covered in the Metabarcoding vignette. The functions and most of their parameters are exactly the same across both workflows, so they aren’t re-explained here; only what’s specific to metagenomic data is. The installation instructions are in the Metabarcoding vignette.

For this example, reads were taxonomically classified with Kraken2 (Wood et al. 2019) and abundance-corrected at the species level with Bracken (Lu et al. 2017).

The data comes from forest soils along the Iztaccíhuatl-Popocatépetl (PNIP) and La Malinche (PNML) transects, Central Mexico:

Hereira-Pacheco, S. E. et al. (2025). Metagenomic analysis of fungal assemblages at a regional scale in high-altitude temperate forest soils: alternative methods to determine diversity, composition and environmental drivers. PeerJ, 13, e18323.

Raw data, metadata and the original analysis scripts: github.com/Steph0522/Fungal_Metagenomes_PNIP_PNML

Loading data

First, let’s load MicroBioMeta and tidyverse (used for data wrangling):

library("MicroBioMeta")
library(tidyverse)

Each sample was processed separately, so bracken_species reports were merged into a single table beforehand (one column per sample, named kraken_pluspfp_<id_metagenome>_report_bracken_species) with a taxonomy column already attached as the last column:

table_kraken <- read.delim(
    system.file("extdata", "table_kraken.txt", package = "MicroBioMeta"),
    row.names = 1, check.names = FALSE
)

table_kraken[1:3, c(1:2, ncol(table_kraken))]
##        kraken_pluspfp_100_report_bracken_species
## 101028                                      1302
## 36050                                        161
## 56646                                        108
##        kraken_pluspfp_105_report_bracken_species
## 101028                                      1066
## 36050                                        345
## 56646                                        203
##                                                                                                                  taxonomy
## 101028 k__Eukaryota; p__Ascomycota; c__Sordariomycetes; o__Hypocreales; f__Nectriaceae; g__Fusarium; s__pseudograminearum
## 36050               k__Eukaryota; p__Ascomycota; c__Sordariomycetes; o__Hypocreales; f__Nectriaceae; g__Fusarium; s__poae
## 56646          k__Eukaryota; p__Ascomycota; c__Sordariomycetes; o__Hypocreales; f__Nectriaceae; g__Fusarium; s__venenatum

Taxonomy is already in the table, so there is no need to use the merge_feature_taxonomy() function.

⚠️ Taxonomy strings from Kraken2 use a k__/p__/c__/… prefix like SILVA, but ranks are separated by "; " (semicolon and space) instead of ";". MicroBioMeta already accounts for this wherever a taxonomy_db argument exists, just pass taxonomy_db = "Kraken2".

Now, let’s load the metadata:

metadata_meta <- read.delim(
    system.file("extdata", "metadata_metagenomic.txt", package = "MicroBioMeta"),
    check.names = FALSE
)

head(metadata_meta[, 1:10])
##   SAMPLEID id_sequence id_metagenome Poligono Sitio Transecto id_new id_fisicoq
## 1   P1S1T1         111           140        1     1         1     30         30
## 2   P1S1T2         112           152        1     1         2     13       <NA>
## 3   P1S1T3         113           164        1     1         3     21         21
## 4   P1S2T1         121           176        1     2         1     11         11
## 5   P1S2T2         122           188        1     2         2     33      13,33
## 6   P1S2T3         123           121        1     2         3     12         12
##   Sites         Names
## 1     1 Tetlanohcan 1
## 2     1 Tetlanohcan 1
## 3     1 Tetlanohcan 1
## 4     2 Tetlanohcan 2
## 5     2 Tetlanohcan 2
## 6     2 Tetlanohcan 2

Kraken column names encode a id_metagenome number (e.g. kraken_pluspfp_100_report_bracken_species) rather than the sample’s actual ID, so we recover it with a regular expression and use metadata_meta$id_metagenome to rename each column to its SampleID:

sample_cols <- setdiff(colnames(table_kraken), "taxonomy")

id_metagenome <- as.integer(gsub("kraken_pluspfp_|_report_bracken_species", "", sample_cols))

colnames(table_kraken)[match(sample_cols, colnames(table_kraken))] <-
    metadata_meta$SAMPLEID[match(id_metagenome, metadata_meta$id_metagenome)]

Let’s rename and format the metadata:

metadata_meta$Polygon <- factor(paste0("Pol", metadata_meta$Poligono), levels = paste0("Pol", 1:6))
metadata_meta$Site <- as.character(metadata_meta$Sitio)
table_meta <- table_kraken[, c(metadata_meta$SAMPLEID, "taxonomy")]

Coordinates were taken and loaded:

coord_meta <- read.csv(
    system.file("extdata", "coord_metagenomic.csv", package = "MicroBioMeta")
) %>%
    dplyr::select(-Site) %>% # drop the CSV's own overall site index (1-12); we want `Sitio` (1-2) instead
    dplyr::rename(Polygon_num = pol, Site = Sitio) %>%
    dplyr::select(Polygon_num, Site, Transecto, Latitude, Longitude)

metadata_meta <- metadata_meta %>%
    dplyr::mutate(Polygon_num = as.integer(gsub("Pol", "", Polygon)), Site = as.integer(Site)) %>%
    dplyr::left_join(coord_meta, by = c("Polygon_num", "Site", "Transecto")) %>%
    dplyr::mutate(Site = as.character(Site))

Starting from a phyloseq or TreeSummarizedExperiment object

MicroBioMeta works with plain tables, but if your data are already in a phyloseq object or in a TreeSummarizedExperiment (the Bioconductor container used by the mia family of packages), from_phyloseq() and from_tse() turn them into the table (with the taxonomy column last) and metadata (with SAMPLEID first) used in this vignette.

To show it, we pack the Kraken2 table into a TreeSummarizedExperiment, with one taxonomy column per rank, as mia would:

counts <- as.matrix(table_meta[, metadata_meta$SAMPLEID])

ranks <- tidyr::separate(
    data.frame(taxonomy = gsub("[kpcofgs]__", "", table_meta$taxonomy)),
    taxonomy, c("Kingdom", "Phylum", "Class", "Order", "Family", "Genus", "Species"),
    sep = "; ", fill = "right"
)
rownames(ranks) <- rownames(table_meta)

samples <- metadata_meta
rownames(samples) <- samples$SAMPLEID

tse <- TreeSummarizedExperiment::TreeSummarizedExperiment(
    assays  = list(counts = counts),
    rowData = ranks,
    colData = samples
)
tse
## class: TreeSummarizedExperiment 
## dim: 87 36 
## metadata(0):
## assays(1): counts
## rownames(87): 101028 36050 ... 208348 27350
## rowData names(7): Kingdom Phylum ... Genus Species
## colnames(36): P1S1T1 P1S1T2 ... P6S2T2 P6S2T3
## colData names(34): SAMPLEID id_sequence ... Latitude Longitude
## reducedDimNames(0):
## mainExpName: NULL
## altExpNames(0):
## rowLinks: NULL
## rowTree: NULL
## colLinks: NULL
## colTree: NULL

from_tse() returns a list with the two data frames:

mbm <- from_tse(tse, assay_name = "counts")

mbm$table[1:3, c(1:2, ncol(mbm$table))]
##        P1S1T1 P1S1T2
## 101028   1985   4341
## 36050     236    231
## 56646     175    151
##                                                                                                                  taxonomy
## 101028 k__Eukaryota; p__Ascomycota; c__Sordariomycetes; o__Hypocreales; f__Nectriaceae; g__Fusarium; s__pseudograminearum
## 36050               k__Eukaryota; p__Ascomycota; c__Sordariomycetes; o__Hypocreales; f__Nectriaceae; g__Fusarium; s__poae
## 56646          k__Eukaryota; p__Ascomycota; c__Sordariomycetes; o__Hypocreales; f__Nectriaceae; g__Fusarium; s__venenatum
mbm$metadata[1:3, 1:5]
##   SAMPLEID id_sequence id_metagenome Poligono Sitio
## 1   P1S1T1         111           140        1     1
## 2   P1S1T2         112           152        1     1
## 3   P1S1T3         113           164        1     1

and those can go straight into any function, e.g. abundance_bar_plot(table = mbm$table, metadata = mbm$metadata, ...).

With a phyloseq object it works the same way:

mbm <- from_phyloseq(physeq)

Composition exploration

Abundance barplot

Same function as in the metabarcoding vignette; the only difference is taxonomy_db = "Kraken2", which tells the taxonomy-parsing logic to expect Kraken2/Bracken-style strings.

abundance_bar_plot(
    table = table_meta,
    metadata = metadata_meta,
    taxonomy_db = "Kraken2",
    level = "genus",
    top_n = 20,
    x_col = "Polygon",
    x_axis_title = "Polygons",
    add_remained = TRUE,
    label = "Genus",
    save_table = FALSE
)

Abundance heatmap

Kraken2/Bracken taxa aren’t ASVs, so feature_prefix = "Taxon" is used here instead of the default "ASV" row-label prefix. condition2 adds a second annotation bar, here the sampling site within each polygon.

abundance_heatmap_plot(
    table = table_meta,
    metadata = metadata_meta,
    top_n = 20,
    show_column_names = FALSE,
    condition1 = "Polygon",
    condition2 = "Site",
    feature_prefix = "Taxon"
)

Alpha diversity

As in the metabarcoding vignette, alpha_hill_corr_plot(table = table_meta) can be used first to check whether the Hill numbers depend on sequencing depth.

Alpha diversity visualization

fill_col is the same as x_col here, so the legend would just repeat the x-axis tick labels - show_legend = FALSE drops it.

alpha_hill_plot(
    table = table_meta,
    metadata = metadata_meta,
    x_col = "Polygon",
    fill_col = "Polygon",
    facet_by = "Site",
    facet_orientation = "horizontal",
    legend_title = "",
    stat = "kruskal.test",
    show_legend = FALSE,
    save_table = FALSE
)

Richness (q=0) is nearly saturated and flat across polygons here — this species-level Bracken table has only 87 fungal species, 83 of them present in all 36 samples, so there is little room left to vary at q=0 — while q=1 and q=2 (which weight by relative abundance) do pick up differences between polygons.

Alpha diversity along a continuous gradient

alpha_decay_plot(
    table = table_meta,
    metadata = metadata_meta,
    cont_var = "pH",
    x_axis_title = "Soil pH"
)

Diversity at q=1 and q=2 increases significantly with soil pH; q=0 doesn’t, for the same ceiling-effect reason as above.

Beta diversity

Ordination of community composition

Here we use Bray-Curtis dissimilarity, which takes into account the abundance of each taxon, with an NMDS ordination. NMDS starts from random configurations, so we use set.seed() to get the same plot every time:

set.seed(123)
beta_ord_plot(
    table = table_meta,
    metadata = metadata_meta,
    distance = "bray",
    ordination = "NMDS",
    group_col = "Polygon"
)
## Run 0 stress 0.109415 
## Run 1 stress 0.1100308 
## Run 2 stress 0.1436787 
## Run 3 stress 0.109415 
## ... New best solution
## ... Procrustes: rmse 4.898679e-05  max resid 0.0002427814 
## ... Similar to previous best
## Run 4 stress 0.1282595 
## Run 5 stress 0.109415 
## ... Procrustes: rmse 5.347491e-05  max resid 0.0002695176 
## ... Similar to previous best
## Run 6 stress 0.1100308 
## Run 7 stress 0.1360412 
## Run 8 stress 0.1426357 
## Run 9 stress 0.1100309 
## Run 10 stress 0.1360412 
## Run 11 stress 0.1095935 
## ... Procrustes: rmse 0.01783814  max resid 0.09869714 
## Run 12 stress 0.1095934 
## ... Procrustes: rmse 0.01783822  max resid 0.09870617 
## Run 13 stress 0.1282595 
## Run 14 stress 0.109415 
## ... Procrustes: rmse 2.319858e-05  max resid 0.0001086243 
## ... Similar to previous best
## Run 15 stress 0.1360412 
## Run 16 stress 0.109415 
## ... New best solution
## ... Procrustes: rmse 1.046168e-05  max resid 5.28883e-05 
## ... Similar to previous best
## Run 17 stress 0.109415 
## ... Procrustes: rmse 2.890036e-05  max resid 0.0001565367 
## ... Similar to previous best
## Run 18 stress 0.109415 
## ... Procrustes: rmse 1.762475e-05  max resid 8.27359e-05 
## ... Similar to previous best
## Run 19 stress 0.1095934 
## ... Procrustes: rmse 0.01783515  max resid 0.09870479 
## Run 20 stress 0.1100308 
## *** Best solution repeated 3 times

Statistical tests for beta diversity

distance = "bray" matches the one used for the ordination above, so the ordination (via the vegan package (Oksanen et al. 2024)) and the PERMANOVA significance test (Anderson 2001) are evaluating the same notion of dissimilarity.

The result is a table figure (a ggplot), so it can be combined with other plots (e.g. cowplot::plot_grid()) or saved with ggplot2::ggsave(). Use save_table = TRUE to also get the results as a text file.

beta_test_table(
    table = table_meta,
    metadata = metadata_meta,
    formula_str = "Polygon*Site",
    distance = "bray",
    test = "permanova",
    permutations = 999
)

Distance-decay of community similarity

beta_decay_plot() tests whether communities that are geographically closer are also more similar in composition, via a Mantel test (Mantel 1967):

beta_decay_plot(
    table    = table_meta,
    metadata = metadata_meta,
    lat_col  = "Latitude",
    lon_col  = "Longitude",
    distance = "bray"
)

Communities that are geographically closer are significantly more similar in composition (Mantel r ≈ 0.21, p ≈ 0.001; the exact p-value jitters slightly between runs since the Mantel test is permutation-based), a real distance-decay signal across these forest soils. The relationship is weak, though: distance explains only about 4 % of the variation in similarity (R² ≈ 0.04). bray is used to be consistent with the ordination above.

Differential abundance analysis

For the heatmap (ALDEx2 (Fernandes et al. 2014)) and ANCOM-BC2 (Lin and Peddada 2024) versions we need a 2-group subset of the 6-level Polygon, in this part we will compare Polygon 2 and 5:

metadata_meta_compar <- metadata_meta %>%
    filter(Polygon == "Pol2" | Polygon == "Pol5")

table_meta_compar <- table_meta[, c(match(metadata_meta_compar$SAMPLEID, colnames(table_meta)), ncol(table_meta))]
aldex_heatmap_plot(
    table = table_meta_compar,
    metadata = metadata_meta_compar,
    group_col = "Polygon"
)

ancombc_plot(
    table = table_meta_compar,
    metadata = metadata_meta_compar,
    group_col = "Polygon",
    level = "Genus",
    min_prevalence = 0.05,
    p_adjust_method = "BH"
)

Identifying important taxa

random_forest_lollipop_plot() uses a Random Forest model (Breiman 2001) to find the taxa that best predict the polygon:

random_forest_lollipop_plot(table = table_meta, metadata = metadata_meta, top_n = 10, variable_to_predict = "Polygon")

ratios_bubble_plot(
    table = table_meta_compar,
    metadata = metadata_meta_compar,
    group_col = "Polygon",
    top_n = 20,
    condition_A = "Pol2",
    condition_B = "Pol5"
)

Environmental analyses

The metadata already carries the soil physicochemical variables measured for these samples, so, as in the metabarcoding vignette, the variables are chosen by name with env_vars (no separate environmental table is needed):

env_vars_meta <- metadata_meta %>%
    dplyr::select(pH:ARENA, -type, -type2) %>%
    colnames()

Correlation between environmental variables and taxonomic abundance

corr_env_abund_plot(
    table = table_meta,
    metadata = metadata_meta,
    env_vars = env_vars_meta,
    taxonomy_db = "Kraken2",
    level = "phylum",
    save_table = FALSE
)

Constrained ordination (CCA)

cca_rda_biplot(
    table = table_meta,
    metadata = metadata_meta,
    env_vars = c("pH", "MO", "N", "P", "K"),
    analysis = "CCA",
    show_all_env_vectors = TRUE,
    group_col = "Polygon",
    scale_arrows = 3
)

References

Anderson, Marti J. 2001. “A New Method for Non-Parametric Multivariate Analysis of Variance.” Austral Ecology 26 (1): 32–46. https://doi.org/10.1111/j.1442-9993.2001.01070.pp.x.
Breiman, Leo. 2001. “Random Forests.” Machine Learning 45 (1): 5–32. https://doi.org/10.1023/A:1010933404324.
Fernandes, Andrew D., Jennifer N. S. Reid, Jean M. Macklaim, Thomas A. McMurrough, David R. Edgell, and Gregory B. Gloor. 2014. “Unifying the Analysis of High-Throughput Sequencing Datasets: Characterizing RNA-Seq, 16S rRNA Gene Sequencing and Selective Growth Experiments by Compositional Data Analysis.” Microbiome 2: 15. https://doi.org/10.1186/2049-2618-2-15.
Lin, Huang, and Shyamal Das Peddada. 2024. “Multigroup Analysis of Compositions of Microbiomes with Covariate Adjustments and Repeated Measures.” Nature Methods 21 (1): 83–91. https://doi.org/10.1038/s41592-023-02092-7.
Lu, Jennifer, Florian P. Breitwieser, Peter Thielen, and Steven L. Salzberg. 2017. “Bracken: Estimating Species Abundance in Metagenomics Data.” PeerJ Computer Science 3: e104. https://doi.org/10.7717/peerj-cs.104.
Mantel, Nathan. 1967. “The Detection of Disease Clustering and a Generalized Regression Approach.” Cancer Research 27 (2): 209–20.
Oksanen, Jari, Gavin L. Simpson, F. Guillaume Blanchet, et al. 2024. Vegan: Community Ecology Package. https://CRAN.R-project.org/package=vegan.
Wood, Derrick E., Jennifer Lu, and Ben Langmead. 2019. “Improved Metagenomic Analysis with Kraken 2.” Genome Biology 20: 257. https://doi.org/10.1186/s13059-019-1891-0.

Session info

sessionInfo()
## R version 4.6.2 (2026-10-29)
## Platform: x86_64-pc-linux-gnu
## Running under: Ubuntu 26.04.1 LTS
## 
## Matrix products: default
## BLAS:   /usr/lib/x86_64-linux-gnu/openblas-pthread/libblas.so.3 
## LAPACK: /usr/lib/x86_64-linux-gnu/openblas-pthread/libopenblasp-r0.3.32.so;  LAPACK version 3.12.0
## 
## locale:
##  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
##  [3] LC_TIME=en_US.UTF-8        LC_COLLATE=en_US.UTF-8    
##  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
##  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
##  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
## 
## time zone: Etc/UTC
## tzcode source: system (glibc)
## 
## attached base packages:
## [1] stats     graphics  grDevices utils     datasets  methods   base     
## 
## other attached packages:
##  [1] doRNG_1.8.6.3       rngtools_1.5.2      foreach_1.5.2      
##  [4] lubridate_1.9.5     forcats_1.0.1       stringr_1.6.0      
##  [7] dplyr_1.2.1         purrr_1.2.2         readr_2.2.0        
## [10] tidyr_1.3.2         tibble_3.3.1        ggplot2_4.0.4      
## [13] tidyverse_2.0.0     MicroBioMeta_0.99.0 rmarkdown_2.32     
## 
## loaded via a namespace (and not attached):
##   [1] fs_2.1.0                        matrixStats_1.5.0              
##   [3] httr_1.4.9                      betapart_1.6.1                 
##   [5] RColorBrewer_1.1-3              doParallel_1.0.17              
##   [7] numDeriv_2016.8-1.1             tools_4.6.2                    
##   [9] backports_1.5.1                 R6_2.6.1                       
##  [11] vegan_2.7-8                     lazyeval_0.2.3                 
##  [13] mgcv_1.9-5                      GetoptLong_1.1.1               
##  [15] permute_0.10-1                  withr_3.0.3                    
##  [17] gridExtra_2.3.1                 cli_3.6.6                      
##  [19] Biobase_2.73.2                  sandwich_3.1-3                 
##  [21] labeling_0.4.3                  sass_0.4.10                    
##  [23] mvtnorm_1.4-2                   S7_1.0.0                       
##  [25] randomForest_4.7-1.2            proxy_0.4-29                   
##  [27] yulab.utils_0.2.6               foreign_0.8-92                 
##  [29] itertools_0.1-3                 readxl_1.6.0                   
##  [31] rstudioapi_0.19.0               generics_0.1.4                 
##  [33] ggVennDiagram_1.5.7             shape_1.4.6.1                  
##  [35] gtools_3.9.5                    car_3.1-5                      
##  [37] Matrix_1.7-6                    interp_1.1-6                   
##  [39] DescTools_0.99.60               S4Vectors_0.51.10              
##  [41] abind_1.4-8                     lifecycle_1.0.5                
##  [43] multcomp_1.4-32                 yaml_2.3.12                    
##  [45] carData_3.0-6                   SummarizedExperiment_1.43.0    
##  [47] SparseArray_1.13.5              grid_4.6.2                     
##  [49] crayon_1.5.3                    lattice_0.23-1                 
##  [51] haven_2.5.5                     cowplot_1.2.0                  
##  [53] magick_2.9.1                    sys_3.4.3                      
##  [55] maketools_1.3.2                 pillar_1.11.1                  
##  [57] knitr_1.52                      ComplexHeatmap_2.29.0          
##  [59] rcdd_1.6-1                      GenomicRanges_1.65.4           
##  [61] rjson_0.2.23                    boot_1.3-32                    
##  [63] gld_2.6.8                       codetools_0.2-20               
##  [65] fastmatch_1.1-8                 picante_1.8.4                  
##  [67] glue_1.8.1                      ggvenn_0.1.19                  
##  [69] data.table_1.18.6.1             treeio_1.37.1                  
##  [71] hilldiv3_3.2.1                  vctrs_0.7.3                    
##  [73] png_0.1-9                       Rdpack_2.6.6                   
##  [75] cellranger_1.1.0                gtable_0.3.6                   
##  [77] cachem_1.1.0                    zigg_0.0.2                     
##  [79] xfun_0.62                       rbibutils_2.4.1                
##  [81] S4Arrays_1.13.3                 Rfast_2.1.5.2                  
##  [83] Seqinfo_1.3.2                   reformulas_0.4.4               
##  [85] survival_3.8-12                 hillR_0.5.2                    
##  [87] geometry_0.5.2                  SingleCellExperiment_1.35.2    
##  [89] iterators_1.0.14                directlabels_2026.8.27         
##  [91] TH.data_1.1-5                   nlme_3.1-172                   
##  [93] ANCOMBC_2.15.1                  data.tree_1.2.0                
##  [95] bslib_0.12.0                    otel_0.3.0                     
##  [97] rpart_4.1.27                    colorspace_2.1-4               
##  [99] BiocGenerics_0.59.13            Hmisc_5.3-1                    
## [101] nnet_7.3-21                     NADA_1.6-1.2                   
## [103] Exact_3.3                       tidyselect_1.2.1               
## [105] compiler_4.6.2                  htmlTable_2.5.0                
## [107] expm_1.0-1                      DelayedArray_0.39.8            
## [109] checkmate_2.3.4                 scales_1.4.0                   
## [111] quadprog_1.5-8                  rappdirs_0.3.4                 
## [113] digest_0.6.39                   minqa_1.2.8                    
## [115] XVector_0.53.0                  htmltools_0.5.9                
## [117] pkgconfig_2.0.3                 jpeg_0.1-11                    
## [119] base64enc_0.1-6                 lme4_2.1-0                     
## [121] MatrixGenerics_1.25.0           fastmap_1.2.0                  
## [123] rlang_1.3.0                     GlobalOptions_0.1.4            
## [125] htmlwidgets_1.6.4               zCompositions_1.6.2            
## [127] ggh4x_0.3.1                     farver_2.1.2                   
## [129] jquerylib_0.1.4                 zoo_1.9-1                      
## [131] jsonlite_2.0.0                  energy_1.7-12                  
## [133] BiocParallel_1.47.0             magrittr_2.0.5                 
## [135] Formula_1.2-6                   patchwork_1.3.2                
## [137] geosphere_1.6-8                 Rcpp_1.1.2                     
## [139] ape_5.8-1                       stringi_1.8.9                  
## [141] rootSolve_1.8.2.4               MASS_7.3-66                    
## [143] parallel_4.6.2                  ggrepel_0.9.8                  
## [145] doSNOW_1.0.20                   lmom_3.3                       
## [147] deldir_2.0-4                    Biostrings_2.81.9              
## [149] splines_4.6.2                   multtest_2.69.0                
## [151] hms_1.1.4                       circlize_0.4.18                
## [153] ALDEx2_1.45.0                   igraph_2.3.4                   
## [155] ggpubr_1.0.0                    ggsignif_0.6.4                 
## [157] buildtools_1.0.0                stats4_4.6.2                   
## [159] magic_1.6-1-1                   evaluate_1.0.5                 
## [161] latticeExtra_0.6-31             RcppParallel_6.2.1             
## [163] nloptr_2.2.1                    tzdb_0.5.0                     
## [165] networkD3_0.4.1                 clue_0.3-68                    
## [167] broom_1.0.13                    tidytree_0.4.9                 
## [169] e1071_1.7-17                    rstatix_1.1.0                  
## [171] viridisLite_0.4.3               class_7.3-24                   
## [173] gsl_2.1-9                       truncnorm_1.0-9                
## [175] snow_0.4-4                      minpack.lm_1.2-4               
## [177] lmerTest_3.2-1                  IRanges_2.47.5                 
## [179] TreeSummarizedExperiment_2.21.0 cluster_2.1.8.3                
## [181] timechange_0.4.0